InterNetCon documentation: VPN on a Windows 2000 machine using RRAS (routing and remote access)

This documentation's it shows how to professional setup a satellite service who use VPN on a Windows 2000 Server using RRAS

(ro) Placa DVB nu trebuie sa aiba setat nimic la DEFAULT GATEWAY sau PREFERRED DNS SERVER sau ALTERNATE DNS SERVER.

(en) The DVB card should not have anything setup to DEFAULT GATEWAY or PREFERRED DNS SERVER or ALTERNATE DNS SERVER

01.jpg (39860 bytes)

1.jpg (39860 bytes)

 

2.jpg (44244 bytes)

 

3.jpg (36030 bytes)

 

4.jpg (38452 bytes)

DVB card it should have the following IP: 10.10.0.2 with netmask: 255.255.255.0

5.jpg (53654 bytes)

 

6.jpg (41802 bytes)

 

7.jpg (42983 bytes)

 

8.jpg (51903 bytes)

 

9.jpg (41482 bytes)

 

10.jpg (39468 bytes)

 

11.jpg (38203 bytes)

 

12.jpg (41686 bytes)

 

13.jpg (42849 bytes)

 

Type the username and password for your account. Let the field Domain: empty.

14.jpg (47846 bytes)

 

15.jpg (47528 bytes)

 

16.jpg (48397 bytes)

 

17.jpg (59241 bytes)

 

18.jpg (51739 bytes)

 

This setup it is specific to InterNetCon service. Ask for this the network administrator in case you use other satellite service.

19.jpg (47996 bytes)

 

This setup it is specific to InterNetCon service. Ask for this the network administrator in case you use other satellite service.

20.jpg (55971 bytes)

 

21.jpg (61562 bytes)

 

23.jpg (37027 bytes)

 

24.jpg (42714 bytes)

 

This settings it mean that after VPN it is established and after InterNetCon interface it is up than the default gateway it should be trough this VPN directly into InterNetCon service.

25.jpg (47553 bytes)

 

If you want to use the shortest way to aces your other servers or customers or hosts inside your network you need to add the route for this computers (smtp server, etc) into RRAS on behalf the LAN Interface. Doing this you will have default gateway to InterNetCon service trough satellite and same time will be able to access all your network directly. Most users forget to setup this routes and are surprised seeing that are unable to access other computers from LAN after VPN it is established.
here you will add the routes to your internal network ! If you use in your internal network 192.168.xxx.xxx than you will describe the network using the IP/MASK and in GW box you will put the IP from your server network adaptor directly connected to your internal lan)

26.jpg (48524 bytes)

 

27.jpg (42695 bytes)

 

After you add all routes for being able to access directly the LAN you go to connect the interface.

28.jpg (62441 bytes)

 

29.jpg (54918 bytes)

 

After interface it is connected open a dos prompt to see if the default route it is inside InterNetCon service: 62.41.25.xxx

30.jpg (88413 bytes)

 

Check with a ping to see if everything it is OK.

31.jpg (81418 bytes)

 

If you successfully install the DVB card, setup the DVB settings, setup RRAS you will be definitely be able to use our service.

VPN details:

Attention: InterNetCon it use TWO WAY AUTENTIFICATION which means that we have 2 PPTP links established.

one: source IP (your IP) and destination IP (hsi.xanticbroadband.com)
second: source IP (hsi.xanticbroadband.com) and destination IP (your IP)

YOUR IP: means the internet real IP on the machine with DVB equipment.

If your firewall policy does not allow the second VPN for being established you will not be able to use InterNetCon service. it might work but only for few minutes or maximum one hour, and after this time the VPN will be down.

Success !


2001 InterNetCon